Scene Description
Simple manual equipment, suitable for small-scale production or investors with limited budgets.
Basic Parameters
| 1 | Measuring machine | HLY-04-00 Size: 3.65m*1.35m*4.2m | 0.55P |  |
| 2 | Mobile mixer and pourer | HLY-06-00 Size: 2.1m*1.3m*2.5m | 5.5P |  |
| 3 | Verticle push cutter | HLY-00 Size: 2.0m*1.35m*1.85m | 15P |  |
| 4 | Manual cantilever embryo spreader | HLY-03-00 Size: 3.0m*1.3*3.2m | 1.6P |  |
| 5 | Pourer track line | HLY-07 Size: 6m |  | |
| 6 | Cantilever spreader track line | HLY-08 Size: 3.5M |  | |
| 7 | Spliced mold | JMX-01-01ZT Size: 2.6m*1.3m*0.3m |  |
The 30m3/day non-autoclaved aerated concrete block production line is designed for small-scale lightweight block manufacturers, new building material projects and investors who need a compact, flexible and lower-investment production solution. As a Small Non-Autoclaved Aerated Concrete Plant, this line is suitable for producing lightweight aerated concrete blocks without autoclave curing.
Hengde provides customized 30m3/day NAAC Block Production Line solutions covering equipment configuration, plant layout, installation guidance and production process support. The production line can help customers manufacture lightweight, porous and energy-saving wall blocks for partition walls, non-load-bearing walls and low-rise construction projects.
This Small Non-Autoclaved Aerated Concrete Plant is suitable for customers who want to enter the lightweight block market with a controlled investment. Compared with larger block production lines, the 30m3/day configuration requires less factory space, simpler operation and a more flexible production layout.
The 30m3/day NAAC Block Production Line can be configured according to local raw materials, target block size, block density, labor conditions and automation requirements. It is a practical choice for small block factories, regional building material suppliers and pilot production projects.
A complete 30m3/day NAAC Block Production Line includes the main equipment required for lightweight aerated concrete block production. Hengde can provide suitable equipment matching based on the customer’s production process and plant conditions.
The batching system helps measure and feed raw materials accurately, supporting stable formula control and consistent block quality.
The mixing and foaming system is used to prepare lightweight aerated concrete slurry. Stable mixing quality is important for producing uniform porous lightweight blocks.
The mixed slurry is poured into molds for forming. Mold size can be customized according to the required block dimensions and market demand.
The cutting system helps process the formed block body into required sizes, while the demolding system supports smoother production operation and reduces manual handling.
As a Small Non-Autoclaved Aerated Concrete Plant, the line uses non-autoclaved curing support instead of autoclave curing. The curing method and handling process can be planned according to local conditions and production requirements.
Blocks produced by the 30m3/day NAAC Block Production Line can be used in different lightweight building material applications, especially where lightweight, insulation and easy construction are important.
Interior partition walls
Non-load-bearing walls
Lightweight wall block projects
Residential building partitions
Commercial building wall materials
Low-cost housing projects
Small regional block supply projects
The 30m3/day capacity is suitable for customers who need a small production scale before expanding to larger output. It helps reduce initial equipment investment and factory space pressure.
This Small Non-Autoclaved Aerated Concrete Plant is designed for NAAC block production without autoclave curing, helping simplify the equipment configuration compared with traditional autoclaved block plants.
Hengde can customize the 30m3/day NAAC Block Production Line based on raw materials, block specifications, automation level and available workshop area.
For new investors and small building material manufacturers, the 30m3/day NAAC block production line provides a practical way to test local market demand and build lightweight block production capacity.
Raw material preparation and batching
Mixing and foaming
Slurry pouring into molds
Pre-curing and forming
Cutting into required block sizes
Demolding and curing support
Stacking, storage and delivery
Hengde provides more than standard equipment supply. For each 30m3/day NAAC Block Production Line, we can assist with production layout planning, equipment matching, process communication, installation guidance and operator training.
If you are comparing a small lightweight block plant, NAAC block equipment or a Small Non-Autoclaved Aerated Concrete Plant, our team can recommend a suitable configuration based on your capacity target, factory space and investment plan.
Solution
Simple operation with easy learning curve; occupies 200-500㎡ space, with flexible adjustment based on output. Capable of producing standard aerated bricks, self-insulating bricks, and expanded clay aggregate blocks.
This model is designed for approximately 30m3/day NAAC block production, suitable for small lightweight block manufacturing projects.
Yes. This is a Small Non-Autoclaved Aerated Concrete Plant, designed for lightweight aerated block production without autoclave curing.
It is suitable for new investors, small block factories, local building material suppliers and pilot production projects.
Yes. Hengde can customize mold size, cutting configuration and production layout according to the required block specifications.
Depending on the initial layout and equipment configuration, the production line can be planned with future expansion in mind.
If you are looking for a 30m3/day NAAC Block Production Line or a Small Non-Autoclaved Aerated Concrete Plant, Hengde can provide a customized equipment solution for your lightweight block production project.
Contact Hengde to discuss your raw materials, factory layout, target block size and investment plan. Our team will help you configure a suitable NAAC block production line for small-scale manufacturing.
Actual Effect
Dimensions are freely adjustable with high precision, featuring a tolerance of ±1mm. Requires only 5-6 operators to complete production, achieving a daily output of 30-50 cubic meters. Offers excellent cost-performance ratio.
HOW CAN WE HELP YOU?
We can provide free design and research of different solutions based on your detailed needs. If you need any assistance before making a final decision, please feel free to contact us at any time. We are happy to add value to you!
Quick Link
Quick Link
No. 25 Fulian Road, Fu'an Industrial Zone, Foshan City
(LUCA Authorized Cooperation Base in Germany)
